NXT III – Fuji scalable placement platform

NXT3

With the NXT III Fuji developed the 3rd generation, with over 50,000 installed worldwide modules very successful NXT series.

For multifunctional and powerful electronics such as mobile phones and automotive applications, both the number of components to be assembled, as well as the possible functionalities further increased. Accordingly, the mounting density of tiny components increases sharply. On the other hand show requirements, such as the loading of shielding plates, components with very small connection pitch and components of package on package applications that the demands on the functionality of assembly machines are becoming more demanding year after year.

The NXT III was developed as a scalable placement platform that ensures both high productivity and quality, which also meets the requirements of future device generations, as is 03015 requirements.

In addition, it ensures high compatibility with its predecessor NXT II. Many existing machine elements, such as placement heads, tray and feeder units can be used even at the NXT III .

  • Perfect for high-volume production and high product mix
  • new servo control for even faster and more accurate motor control
  • New, more stable design of the X / Y axes and the machine frame for greater speed and higher precision
  • further improvement in the throughput of the entire component spectrum of 03015, medium and large components by using the new “Flying Vision System”
  • Support the next generation component (03015) by the new, super-fast placement H24 (24 Nozzles, 35,000 BT / h) and even faster feeders W08f
  • Intuitive and easy to use machine with Touch Panel Interface
  • Scalable depending on the required feeder positions and throughput
  • 2 types of modules: M3 (width 325mm, 20 pitches Feeder) or M6 (width 650 mm, 45 pitches Feeder)
  • Exchange of Heads in minutes without tools
  • Replacement of feeder during production without stopping the
    machine is possible
  • Compatible with all AIMEX machines

By using the appropriate placement heads each NXT III module can be exactly matched according to your production conditions. The NXT III thus covers your entire component spectrum is to be loaded.

The platform allows not only loading the integration of additional functions:

  • Glue dispensation
  • 3D Solder Paste Inspection
  • Component Inspection

Their big advantage:

  • Shortening the line length

  • Consistent software

  • Simplified operation

  • Reduction in maintenance expense

M3 IIIM6 III
Applicable PCB size
(L x W)
48 x 48 mm to 250 x 510 mm (double conveyor)*
48 x 48 mm to 250 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
48 x 48 mm to 534 x 510 mm (double conveyor)*
48 x 48 mm to 534 x 610 mm (single conveyor)
*Double conveyors can handle PCBs up to 280 (W) mm. PCBs larger than 280 (W) mm must be produced by changing the double conveyor to single lane production mode.
Part typesUp to 20 types of parts (calculated using 8 mm tape)Up to 45 types of parts (calculated using 8 mm tape)
PCB loading timeFor double conveyor: 0 sec (continuous operation)
For single conveyor: 2.5 sec (transport between M3 III modules),
3.4 sec (transport between M6 III modules)
For double conveyor: 0 sec (continuous operation)
For single conveyor: 2.5 sec (transport between M3 III modules),
3.4 sec (transport between M6 III modules)
Placement accuracy
(Fiducial mark standard)
* The placing accuracy is obtained from tests conducted by Fuji.
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04 : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
H24G : +/-0.025 mm (Standard mode) / +/-0.038 mm (Productivity priority mode) (3sigma) cpk≥1.00
V12/H12HS : +/-0.038 (+/-0.050) mm (3sigma) cpk≥1.00
H08M/H04S/H04SF : +/-0.040 mm (3sigma) cpk≥1.00
H08/H04/OF : +/-0.050 mm (3sigma) cpk≥1.00
H02/H01/G04 : +/-0.030 mm (3sigma) cpk≥1.00
H02F/G04F : +/-0.025 mm (3sigma) cpk≥1.00
GL : +/-0.100 mm (3sigma) cpk≥1.00
Productivity
* The throughput above is based on tests conducted at Fuji.
H24G: 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12: 26,000 cph
H12HS: 24,500 cph
H08: 11,500 cph
H04: 6,500 cph
H04S: 9,500 cph
H04SF: 10,500 cph
H02: 5,500 cph
H02F: 6,700 cph
H01: 4,200 cph
G04: 7,500 cph
G04F: 7,500 cph
GL: 16,363 dph (0.22 sec/dot)
H24G: 37,500 cph (Productivity priority mode) / 35,000 cph (Standard mode)
V12: 26,000 cph
H12HS: 24,500 cph
H08M: 13,000 cph
H08: 11,500 cph
H04: 6,500 cph
H04S: 9,500 cph
H04SF: 10,500 cph
H02: 5,500 cph
H02F: 6,700 cph
H01: 4,200 cph
G04: 7,500 cph
G04F: 7,500 cph
0F: 3,000 cph
GL: 16,363 dph (0.22 sec/dot)
Supported partsH24G: 03015 to 5 x 5 mm, Height: up to 2.0 mm
V12/H12HS: 0402 to 7.5 x 7.5 mm, Height: up to 3.0 mm
H08M: 0603 to 45 x 45 mm,Height: up to 13.0 mm
H08: 0402 to 12 x 12 mm, Height: up to 6.5 mm
H04: 1608 to 38 x 38 mm, Height: up to 9.5 mm
H04S/H04SF: 1608 to 38 x 38 mm, Height: up to 6.5 mm
H02/H02F/H01/0F: 1608 to 74 x 74 mm (32 x 180 mm), Height: up to 25.4 mm
G04/G04F: 0402 to 15 x 15 mm, Height: up to 6.5 mm
H24G: 03015 to 5 x 5 mm, Height: up to 2.0 mm
V12/H12HS: 0402 to 7.5 x 7.5 mm, Height: up to 3.0 mm
H08M: 0603 to 45 x 45 mm,Height: up to 13.0 mm
H08: 0402 to 12 x 12 mm, Height: up to 6.5 mm
H04: 1608 to 38 x 38 mm, Height: up to 9.5 mm
H04S/H04SF: 1608 to 38 x 38 mm, Height: up to 6.5 mm
H02/H02F/H01/0F: 1608 to 74 x 74 mm (32 x 180 mm), Height: up to 25.4 mm
G04/G04F: 0402 to 15 x 15 mm, Height: up to 6.5 mm
Module width320 mm645 mm
Machine dimensionsL: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III)
W: 1900.2 mm, H: 1476 mm
L: 1295 mm (M3 III x 4, M6 III x 2) / 645 mm (M3 III x 2, M6 III)
W: 1900.2 mm, H: 1476 mm
DynaHead(DX)
Nozzle quantity1241
Throughput (cph)25,000
Parts presence function ON: 24,000
11,0004,700
Part size
(mm)
0402 (01005″) to 7.5 x 7.5
Height: Up to 3.0 mm
1608 (0603″) to 15 x 15
Height: Up to 6.5 mm
1608 (0603″) to 74 x 74 (32 x 100)
Height: Up to 25.4 mm
Placing accuracy
(Fiducial mark based referencing)
+/-0.038 (+/-0.050) mm (3σ) cpk≥1.00*
*+/-0.038 mm obtained with rectangular chip placement (high accuracy tuning) under optimal conditions at Fuji.
+/-0.040 mm (3σ) cpk≥1.00+/-0.030 mm (3σ) cpk≥1.00
Part presence
check
oxo
Parts supply
Tape
ooo
Parts supply
Stick
xoo
Parts supply
Tray
xoo
Parts supply system
lntelligent feedersSupport for 4, 8, 12, 16, 24, 32, 44, 56, 72, 88, and 104 mm wide tape
Stick feeders4 ≤ Part width ≤ 15 mm (6 ≤ Stick width ≤ 18 mm), 15 ≤ Part width ≤ 32 mm (18 ≤ Stick width ≤ 36 mm)
TraysApplicable tray size: 135.9 x 322.6 mm (JEDEC standard) (Tray Unit-M),276 x 330 mm (Tray Unit- LT), 143 x 330 mm (Tray Unit-LTC)
Options
Tray feeders, PCU II (Pallet Change Unit), MCU (Module change unit), Engineering panel stand, FUJI CAMX Adapter, Fujitrax

*Contact Fuji or sales agents for details regarding unit combinations and other detailed specifications.

Non-binding enquiry

5 + 3 = ?